Hull, Deck & Cockpit
The SABRE 42 was produced with SABRE YACHTS proprietary "DuraLam" lamination and coring process.
The TIOGA has a FLAG BLUE AWLGRIP finish. Her overall Topsides condition is exceptionally good.
Hull
DURALAM Hand laid-up fiberglass hull with alternating layers of matt and woven wroving.w/ GLIDDEN Vinylester resins.
Balsa coring for the hull Topsides
- AWLGRIP finish, FLAG BLUE (NEW, 2019)
- Double WHITE Boot-Tops, AWLGRIP (NEW, 2019)
- GOLD Cove Stripe (NEW, 2019)
- RED Bottom paint (NEW, 2022)
- Balsa-cored hull
- Keel-Centerboard version (Board Up: 4'9" & Board Down, 8'6")
- Centerboard System is manually-operated (note: it is fiberglass with a metal core for strength & stiffness and to provide negative buoyancy)
- Lead ballast, external (8,200 lbs)
- Displacement: 19,200 lbs (note: CB / Centerboard version only)
Deck
- WHITE Gelcoat finish
- LIGHT GRAY Gelcoat Contrasting non-skid surface
- Balsa cored deck (note: w/ aluminum backing plates for all deck hardware)
- Bow pulpit, double-rail, stainless steel
- Bow anchor well
- Life-line stanchions, stainless steel
- Upper & lower lifelines, 1x19 stainless steel wire, plastic-coated
- Life-line gates, port & starboard (note: w/ upper & lower lines
- Stern pulpit, double-rail, stainless steel
- Life-line gate in Stern Pulpit
- Grab / Safety Rails, teak, full-length
- (4) Dorade vents
- (10) BOMAR Deck hatches
- (10) BOMAR Opening ports
- (4) Portlights, fixed
- Companionway hatch w/ tinted LEXAN panel
- Companionway boards. teak, (2) sections, varnished (note: can be secured from interior)
- Screens for Companionway entrance
- Line storage locker on deck w/ LEXAN lid
Cockpit
The SABRE 42 "T" Cockpit measures 8'9" in length.
- EDSON Wheel steering, Destroyer Wheel w/ 44" diameter
- Binnacle w/ Engine Throttle & Shift Controls
- Binnacle Guard, stainless steel
- Wheel Brake
- RITCHIE Compass
- Engine instrumentation, starboard side aft (note: operating functions under the port side seat locker)
- Propane storage locker, starboard side (note: holds (2) large tanks w/ special securing bracets installed)
- Lazarette locker w/ access under the Helm Seat
- Cockpit seat locker; starboard side "step-in" w/ teak steps & shelving for storage
- Cockpit seat locker, port side for line & similar storage
Accommodations
General Features
The SABRE 42 has light & bright and a very well ventilated interior accommodation with the provided numerous hatches Dorade vents, portlights & opening ports. throughout the yacht's interior.
There are 2) Staterooms & (2) Heads, Fore & Aft.
- Teak Interior Joinery throughout
- Hand-rubbed interior teak varnish fi nish (note:"Varsheen" SABRE YACHTS proprietary process)
- Teak & Holly soles throughout, varnished
- Screens for the hatches & opening ports
- Excellent storage w/ plentiful lockers, cabinets & shelving throughout
- Storage lockers w/ louvered door panels
- All drawers w/ solid teak facing
- Privacy Shades throughout
- Interior Upholstery, RUST RED w/ WHITE pattern fabric throughout
- Berth Lengths: 6'6" throughout
- Marine Vinyl Interior Soft Headliners throughout, removable
Salon
- Headroom: 6'5"
- Companionway entrance w/ (3) steps
- Storage access under the Companionway via opening hinged steps (note: storage under (2) steps & battery access under the 3rd)
- Teak bookcase on forward bulkhead, port side
- "L" Shaped Settee to port that makes into a double berth
- Teak table, fixed w/ (2) folding leaves (note: storage underneath the table w/ (2) access panels on the starboard side
- Settee Berth to starboard
- Cabinetry & Shelving to port & starboard
- Contoured cushions, port & starboard
- Dust Trap in Salon & access under removable sole section
Fore Cabin
- Large "V" Berth (note: described as "Queen-sized")
- Filler piece for V-Berth (note: hard-bottom hinged support piece stores forward on shelve)
- Teak ceilings
- Hanging Locker to starboard & small settee to port
- Storage drawers extend under the V-Berth
- Bureau w/ drawers
- Ensuite entrance to the Forward Head
- Entry doors to the Fore Cabin and the Forward Head
Aft Cabin
The Aft Cabin is located in the aft part of the Salon area, port side aft & adjacent to the Galley.
- Entrance door
- Large Double Berth
- Teak ceilings (note: teak slats on sides of the hull)
- Storage shelving
- Bureau w/ drawers
- Separate door to access the Aft Head
Nav Station
The aft-facing Nav Station is located to starboard & just forward of the Companionway entrance.
- Large "chart-sized" table
- (3) Storage drawers
- Bin
- Shelving
- Electrical Panel for DC & AC functions
- Electronics: VHF's, SSB (inop),
Galley
The "U" Shaped Galley for the SABRE 42 is located on the starboard side & aft.
- Stove w/ Oven, HILLERANGE Propane, (3) burner, gimbaled
- (2) Propane tanks, aluminum (note: located aft in Cockpit, starboard side)
- XINTEX Gas Fume Detector (note: panel located at the Nav Station)
- Crash / Safety bar for the Stove / Oven, stainless steel
- (2) Port / pan holders, adjustable
- Refrigeration, SEA FROST w/ holding plate built into the ice chest & w/ 120VAC Compressor & Engine Drive (NEW, 2016)
- Sinks, double, stainless steel
- FORMICA Countertops, OFF WHITE
- Stove top cover, OFF WHITE FORMICA, removable w/ storage behind the Stove
- Hand-pumps for both "fresh" & "salt" water service
- Storage drawers for Galleyware
- Trash Receptacle, built-in
- Paper Towel Holder, teak
- (2) Harness attachment rings (note: available for Galley safety sling)
Heads
The TIOGA has (2) Heads with following features.
- Holding Tank Capacity: 50 US Gallons (note: MSD Type 3, plastic)
- Macerator pump & deck discharge for the Holding Tank
- (2) Marine Heads, electric flush (note: salt water)
- Showers for both Heads (note: Aft Head has a Stall Shower)
- Vanities w/ stainless steel sinks
- (2) Shower Sump Pumps, electric
- WHITE Formica w/ teak trim, varnished for the joinery
- Mirrors
- Teak gratings, removable
Aft Head
- Separate Stall Shower
- Marine Head (NEW, 2015)
- Hatch
- (2) Opening Ports
- Access door from Aft Head
- Access door from Salon
- Forward Head
- Hand-held Shower unit
- Hatch
- Opening Port
- Access door from Salon Passageway
Rig, Rigging, Winches & Sails
Rig
The TIOGA is equipped with a masthead rig HOOD YACHT SYSTEMS Stoway Roller-Furling aluminum mast & boom for the Mainsail. The Headsail Roller-Furling unit was included with the SABRE YACHTS Factory Optional "QuickFurl" Package. The spars have a WHITE AWLGRIP finish. The mast is keel-stepped and has (2) sets of spreaders.
The SABRE 42 has upper & lower shrouds and a fore & aft lower shroud chain plate system.
Dimensions & Info
Sail Plan: I=52.50' J=14.33', P=45.80' & E=16.
Sail Area: 754.01 Sq./Ft. (note: 100% Fore & Main Triangles, 376.16' + 377.85')
Mast Height Above W/L: 59'
PHRF: New England Base Rating = 108 sec./mile (note: for the SABRE 42 CB version)
Rigging
- Standing Rigging, 1x19 wire, stainless steel (NEW, 2001)
- FURLEX 300 S Roller-Furling for the Jib / Genoa (note: foil rebuilt, 2015)
- SAILTECH Backstay Adjuster, hydraulic
- Boom Vang, solid spring / oil type
- Spinnaker Pole (note: mounted vertically, on the Mast, forward)
- Internal halyards
- Running Rigging: (1) Main Halyard, (1) Jib / Genoa Halyard, (1) Spinnaker Halyard. (1) Boom Topping Lift, Genoa Sheets, Mainsheet, Spinnaker Pole Topping Lift
- Halyards & Lines; YACHT BRAID & replaced over the past (6) years)
- Genoa tracks, inboard
- Adjustment lines for the inboard Genoa track cars
- Genoa tracks, outboard (note: mounted on the teak toe rail)
- Genoa cars for all tracks; (4) Roller & (4) sliding pin-stop cars for blocks
- HARKEN Mainsheet Traveler (note: mounted on Coachroof aft)
- Cross-hauls for the Traveler car
- SCHAEFER MARINE Turning Blocks aft, deck-mounted
- Halyards & Lines led aft via SCHAEFER MARINE Line Organizers to (7) SCHAEFER MARINE Line Stoppers (note: 3x banks of (2) & 1xbank of (1) to the (4) aft-mounted (3) L-30 CST winches
- (1) SCHAEFER MARINE Line stopper at the Mast, port side
- Shroud rollers, aluminum
- Spreader boots (NEW, 2022)
- Winches (LEWMAR)
- (2) L-52 CST (Chrome Self-tailing) (2) speed Primary / Jib-Genoa
- (2) L-44 CST Secondary / Spinnaker
- (1) L-30 CST (2) speed Mainsheet
- (1) L-30 CST (2) speed Main Halyard
- (1) L-30 CST (2) speed Line
- (1) L-40 C (2) speed Jib / Genoa Halyard (note: on mast, port side)
Sails
- Mainsail, Roller-Furling, NORTH SAILS (NEW, 2018)
- Genoa, 130%, Roller-Furling, Dacron
- Spinnaker .Tri-Radial, Nylon, 75 oz.
Electronics
Some of the Nav Displays for the TIOGA are installed in a NAVPOD on the Binnacle.
(3) RAYMARINE Displays are installed in the Cockpit, flush-mounted, forward & on the starboard side. There is a hinged opening panel at the Nav Station for access.
Communication
- VHF, STANDARD Horizon Quantum GX2360SVHF Remote Access Microphone (RAM) at Helm Station
- VHF, ICOM IC M-59
- SSB, SEA 235 (note: not connected or recently proven)
- RAYMARINE A.I.S. Transponder / Receiver (2011)
Navigation
- RAYMARINE E-80 GPS / Chartplotter / Radar (2006)
- RAYTHEON RN300 GPS
- RAYMARINE ST50 Depth Sounder (note: new Transducer, 2017)
- RAYTHEON Gyro Plus Marine Gyro Compass
- DYTEK Sea Temp
- HP Monitor w/ Keypad (note: at Nav Station)
Performance
- RAYMARINE ST70 Speed / Knotmeter (NEW, 2023)
Radar
- RAYMARINE 2 kW, analog (note: Radome installed on a custom mast mount on the Transom)
Autopilot
- RAYMARINE ST6000+ w/ Type 2S Drive & Remote
Entertainment
Systems
The TIOGA is provided with a MASE Model IS 2.7S diesel genset. The unit is located aft & under the Cockpit forward and on centerline. The unit was NEW in 2015.
- Hours: 230
- Capacity: 2.7 kW
- Sound Box
Plumbing
The Fresh Water Faucets in both Heads were replaced, Spring 2023.
- Pressure hot & cold water service
- Water Tank Capacity: 120 US Gallons in (2) tanks
- Hot Water Heater, RARITAN, (12) US Gallons
- Showers in both Heads
- Cockpit Shower (note: located in starboard side seat locker)
- Bilge Pumps: (1) WHALE Gusher Manual in Cockpit & (1) RULE 3750 electric / automatic below (note: bilge pump discharge lines replaced, 2022)
- (9) Sea Cocks; Bronze Ball-Cock w/ levers
Lighting, Exterior
- Nav Lights
- Masthead Light w/ Strobe
- Anchor Light
- Foredeck Floodlight
Lighting, Interior
Most of the interior Reading & Dome lights were upgraded to LED, Spring, 2023.
- (7) Reading Lights in Salon and Fore & Aft Cabins (note: all new LED units, 2023)
- (9) Overhead Dome Lights throughout; ((note: (7) NEW LED units w/ Brass Finish & (2) Chrome finish)
- Navigators Light
- Courtesy Lights throughout
HVAC
Propulsion
The SABRE 42 is powered by a WESTERBEKE Model W-46 normally-aspirated (4) cylinder marine diesel that is rated at 46 SHP at 3000 RPM's.
The engine is located under the Galley sink area. It is easily accessible via removable panels on (3) sides.
- Engine Hours: 4670 (note: engine was overhauled in 2009 .. approximately 1800 hours logged since the overall date)
- Fuel Capacity: 50 US Gallons (note: aluminum tank)
- Instrumentation: Tachometer, Engine Hour Meter, Voltmeter, Oil Pressure, Fuel Quantity & Engine Temperature (note: units are in the Engine Control Panel at the Helm Station)
- BALMAR High-Capacity Alternator (NEW, 2022)
- HURTH Reduction Gear HBW150-2R
- Engine Drive System, AQUADRIVE Thrust Bearing
- MAX-PROP, 16" diameter (3) blade, feathering
- Prop, bronze, (2) blade, fixed (note: original unit & "spare")
- Propeller Shaft, 1-1/4" stainless steel
- PSS Dripless Shaft Seal (NEW, 2018)
- Bilge Blower, 12VDC (note: controls at the Helm Station panel)
- RACOR Fuel Filters, 500FG & R12
- Emergency Fuel Shut-Off's, manual: at tank & below Companionway steps
Major Maintenance
- Heat Exchanger (2020)
- Alternator (note: replace & upgrade, 2022)
- Cutlass bearing (2018)
- Dripless Shaft Seal (2018)
- Engine Water Pump (2014)
